Disable Driver Signature On Win 8.1 and 10

             To disable driver signature verification, we’re going to need to get into the Troubleshooting options from the boot manager. The easiest way to bring this screen up is using a secret trick.

            Simply select Restart from the power options menu (on Windows 8 that’s under Charms or on the login screen, and in Windows 10 it’s on the Start Menu).

Hold down the SHIFT key while you click Restart.

           

              (Again, you can use this trick on any of the power menus in Windows 8 or 10, whether on the login screen, Charms bar, Start Menu, or Start Screen)

                Once your computer has rebooted you will be able to choose the Troubleshoot option.

            

                Then head into Advanced options.

            

                 Then Startup Settings.

         Since we are modifying boot time configuration settings, you will need to restart your Computer one last time.

         

              Finally, you will be given a list of startup settings that you can change. The one we are looking for is “Disable driver signature enforcement”. To choose the setting, you will need to press the F7 key.

           That’s all there is to it. Your PC will then reboot and you will be able to install unsigned drivers without any error message.

List Of 36 Useful Secret Codes For Android Mobile Phones

        Hello all, here is a wide collection of secret codes for your mobile with Android OS. These codes enables you to access the hidden options which are not shown by default on your device, and can be used for testing the functions of various utilities used by your mobile.

Note: These codes are used only by technicians, So be careful with them and use it at your own risk and We Cannot guaranty that these codes will work on all Android mobiles!

General Codes:

 

*#06# – To Display's IMEI number.

*2767*3855# – To format your device i.e To delete everything on the phone memory (Can be customized).

*#*#4636#*#* – This code will display your usage statistics and battery.

*#*#273282*255*663282*#*#* – This code helps you to back up all media files on your mobile.

*#*#197328640#*#* – This code will send you to the test mode, to test various functionality of your mobile.

*#*#1111#*#* – This code will display FTA software version.

*#*#1234#*#* – This code will show PDA and firmware version.

*#*#232339#*#* – For wireless LAN tests.

*#*#0842#*#* – This code is used for Backlight/vibration test.

*#12580*369# – Display's Software and hardware info.

*#*#2664#*#* – This code is used for Testing the touchscreen.

*#9900# – System dump mode.

*#9090# – Diagnostic configuration.

*#*#34971539#*#* – Will display Detailed camera information.

*#872564# – USB logging control.

*#301279# – HSDPA/HSUPA Control Menu.

*#7465625# – This code will display phone's lock status.

*#0*# – This code will enable you to enter the service menu on newer phones like Galaxy S III.

*#*#7780#*#* – Reset the /data partition to factory state.

Basic Codes:

 

*#*#7780#*#* - This code is used for factory restore setting.This will remove Google account setting and System and application data and settings.

*2767*3855# - This code is used for factory format, and will remove all files and settings including the internal memory storage. It will also re install the firmware.

*#*#4636#*#* - This code show information about your phone and battery.

*#*#273283*255*663282*#*#* - This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.

*#*#197328640#*#* - This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.

*#*#7594#*#* - This code enable your "End call / Power" button into direct power off button without asking for selecting any option(silent mode, aero plane and power-off).

*#*#8255#*#* - This code can be used to launch G Talk Service Monitor.

*#*#34971539#*#* - This code is used to get camera information. Please avoid update camera firmware option.

W-LAN, GPS and Bluetooth Test Codes:

*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - W-LAN test (Use “Menu” button to start various tests).

*#*#232338#*#* - Shows WiFi MAC address.

*#*#1472365#*#* - GPS test.

*#*#1575#*#* - Another GPS test.

*#*#232331#*#* - Bluetooth test.

*#*#232337#*# - Shows Bluetooth device address.

Codes to launch various Factory Tests:

 

*#*#0842#*#* - Device test (Vibration test and BackLight test).

*#*#0588#*#* - Proximity sensor test.

*#*#0*#*#* - LCD test.

*#*#2664#*#* - Touch screen test.

*#*#2663#*#* - Touch screen version.

*#*#0283#*#* - Packet Loopback.

*#*#0673#*#* OR *#*#0289#*#* - Melody test.

*#*#3264#*#* - RAM version.

Code for firmware version information: 

 

*#*#1111#*#* - FTA SW Version.

*#*#2222#*#* - FTA HW Version.

*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number.

*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate.

*#*#1234#*#* - PDA and Phone.

STAR WARS in cmd

On Windows 8, Windows 8.1, Windows 7 and Windows Vista

        Telnet is turned off by default in the latest versions of Windows. So, in order to watch star wars, you must first enable telnet by going to Control Panel › Programs › Turn Windows Feature On or Off and ticking both the telnet check boxes. After doing that, follow the steps given below:-

 

Tick the  Telnet Client and Telnet Server .

 

Working In cmd.

 

1. Open cmd.

2. Type telnet and press Enter. ( You will get the following cmd window)

 

3. Now type o and press Enter.

4. Now type towel.blinkenlights.nl and press Enter.

Now watch and enjoy Star Wars.

 

           A command prompt window like the one in the image will open with the movie being played in it. See the movie yourself. Did you enjoy watching this new version of Star Wars? Well, I did and know it for sure that you would have too.

          If you do not need telnet anymore, you can turn it off  fby going to Control Panel › Programs › Turn Windows Feature On or Off and ticking both the telnet check boxes.

Creating Full version of WinRAR.

1. Open WinRAR.

2. Select Help.

3. Select About WinRAR.

If you see "40 days trial copy" written in dialog box (as the image below) then your WinRAR is not registered.

HOW TO REGISTER WINRAR.

1. Open Notepad.

2. Copy and Paste the following script

RAR registration data

czsharesoftwares
Unlimited Company License
UID=0bb7bde1ecabf8e8e1cc
6412212250e1cc791b0a76396c8a87f666513d804ef60d500834e3
382215e0894f1b53284960fce6cb5ffde62890079861be57638717
7131ced835ed65cc743d9777f2ea71a8e32c7e593cf66794343565
b41bcf56929486b8bcdac33d50ecf7739960e5baa101a64c62e679
fd9b9e297d72cc6ca623d8a89e78ea1192e53056d11d4bf3a943e5
5d22e03dd5623087d32b21b2fa9bb3f468d49c3948e4ee65609c5a
dbce8ab2b52d393e19ac1621cba14826ebebe39e95873837188944

3. Open the File, select Save As.

4. In File Name field type rarreg.key.

5. In the Save As type field select "All Files".

6. Click Save.

4. Copy the saved file to WinRAR Folder (Default: C:\Program Files\WinRAR) .

8. Open WinRAR again and check the About WinRAR.

9. Your WinRAR is registered now.

Operating System wasn't found. Press Ctrl+Alt+Del to restart

An Operating System wasn't found. Try disconnecting any drives that don't contain an operating system.
Press Ctrl+Alt+Del to restart.

If  you have the same problem like above  just follow the following  method.

USING DISK PART METHOD

Insert a windows disk into the CD Drive ( doesn't matter which version of windows it is) boot into the CD
Select repair your PC 
Select advanced options
Select command prompt
 
Type the following
1)diskpart
2)list disk
3)select disk 0 (select your hard disk num listed in list disk here mine is disk 0)
4)list partition
5)find the partition in which your OS has been installed (you can find by seeing the size of the partition hear my OS partition is partition 1)
6)select partition 1

7)active
8)exit
that's it you can reboot your system